GSP - High Tech Saws

Slitting saw and knives - production, service


promo video - slitting saws GSP Zborovice

GSP
WORLDWIDE

Slitting saws DIN 1837 A

Slitting saws DIN 1837 A

Slitting saws DIN 1837 A

These buttons will support and recommend our site to other Internet users. Thank you.

Materials: steel, cast, non-ferrous metals, plastic
Application: recommended for slotting the fragile and hard materials which make short chips, suitable for cutting thin-walled profiles
Machine: metal processing machines

Characteristic:

  • Circular saw blades for metal with fine teeth
  • hollow ground with flange, standardly produced without driving pin holes and without groove
  • tooth form A (by request AW)
  • the cutting edge is very sharp
  • the chip clearance is reduced and it cant remove longer chips away from the cutting area efficiently
  • the tolerances and hollow ground according DIN 1840

High quality slitting saw 1837 A, designed especialy for high performance. Slitting saws produced in Europe - Czech Republic.

Product description Slitting saws DIN 1837 A

Circular saw blades for metal DIN 1837 A with fine teeth and teeth form A are recommended for slotting the fragile and hard materials. The teeth form A is suitable especially on the thin saw blades with tooth pitch from 0,8 mm to 3,0 mm. The cutting edge is very sharp. The chip clearance is reduced and it cannot remove longer chips away from the cutting area efficiently. In standard modification the slitting saw blades are made with hollow ground and with flange. They can be ordered with driving pin holes or with groove and teeth form AW (the teeth form A with alternate chamfering).

HSS - circular saw blades for metal DIN 1837A - fine teeth

D (mm) 20 25 32 40 50 63 80 100 125 160 200 250 315
dH7 (mm) 5 8 8 10 13 16 22 22 22 32 32 32 40
B (mm) number of teeth
0,20 mm 80 80 100 128 128                
0,25 mm 64 80 100 100 128 160              
0,30 mm 64 80 80 100 128 128 160            
0,40 mm 64 64 80 100 100 128 160            
0,50 mm 48 64 80 80 100 128 128 160          
0,60 mm 48 64 64 80 100 100 128 160 160        
0,80 mm 48 48 64 80 80 100 128 128 160        
1,00 mm 40 48 64 64 80 100 100 128 160 160 200    
1,20 mm 40 48 48 64 80 80 100 128 128 160 200    
1,60 mm 40 40 48 64 64 80 100 100 128 160 200 200  
2,00 mm 32 40 48 48 64 80 80 100 100 128 160 200  
2,50 mm 32 40 40 48 64 64 80 100 100 128 160 160 200
3,00 mm 32 32 40 48 48 64 80 80 100 128 160 160 200
4,00 mm 24 32 40 40 48 64 64 80 100 100 128 160 160
5,00 mm 24 32 32 40 48 48 64 80 80 100 128 128 160
6,00 mm 24 24 32 40 40 48 64 64 80 100 128 128 160

 

Small Slitting saws in imperial sizes according norms ASA teeth AFTe i.e. with fine pitch as to DIN 1837 Toothform A. Used for shallow cutting and cut-off operations. Hollow ground on both sides to prevent binding.

D (mm) 3/4 1" 1 1/4 1 1/2 2"
dH7 (mm) 1/4 1/4 3/8 3/8 3/8
B (mm) number of teeth
0,006 40 50 60 72 100
0,008 40 50 60 72 100
0,1 40 50 60 72 100
0,01 40 50 60 72 100
0,012 40 50 60 72 100
1/6 4 40 50 60 72 100
0,02 40 50 60 72 100
0,025 40 50 60 72 100
1/3 2 40 50 60 72 100
3/6 4 40 50 60 72 100
1/1 6 40 50 60 72 100
5/6 4 40 50 60 72 100
3/3 2 40 50 60 72 100
7/6 4 40 50 60 72 100
1/8 40 50 60 72 100
5/3 2       72 100
3/1 6       72 100
7/3 2         100
1/4         100

 

Small Slitting saws in imperial sizes according norms ASA teeth AFTe i.e. with fine pitch as to DIN 1837 Toothform A. Used for shallow cutting and cut-off operations. Hollow ground on both sides to prevent binding.

D (mm) 2 1/2 3" 3 1/2 4" 4" 4 1/2" 4 1/2" 5" 6" 6" 7" 7" 8" 8" 10"
dH7 (mm) 1" 1" 1" 1" 1" 1 1/4" 1" 1" 1 1/4" 1 1/4" 1" 1 1/4" 1" 1 1/4" 1"
B (mm) number of teeth
1/6 4 62 74 100   100                    
1/3 2 62 74 88 100 100     124 150            
3/6 4 62 74   100       124 150            
1/1 6 62 74 88 100 100     124 150   176 176 200   250
5/6 4   74   100                      
3/3 2 62 74   100     112 124 150            
7/6 4       100                      
1/8 62 74   100 100 112   124 150 150     200 200 250
5/3 2 62 74   100       124              
3/1 6   74   100       124 150 150          
7/3 2   74                   176      
1/4 62 74   100       124 150 150          

Slitting saws  range is ø 20 mm - ø 315 mm with thicknesses ranging 0,2 mm - 6 mm in variable increments with tooth forms: A - B - BW. All standard saws are available in HP-GRIND execution but are readily available in VAPO or P.V.D. (Physical Vapour Deposition) coated execution. The above-mentioned examples of slitting saws are only a small overview of our production posibilities.

We are ready to produce also different tools according to your documentation like prismatic cutters, gear milling cutters, profile cutters, shell end mills cutters, side and face milling cutters, halfcircle milling cutters convex, half circle milling cutters concave, corner rounding milling cutters, single angle milling cutters, double angle milling cutters , HSS Side Chip Clearance Saws straight teeth, Slitting saw, M2 Side Chip Clearance Saws staggered tooth, HSS Side and Face Cutters straight teeth, HSS Side and Face Cutters staggered teeth.

Pictures

Order goods Slitting saws DIN 1837 A

Dear customer, you have the opportunity to make a preliminary inquiry to this product. The basket inquiries you can specify your requirements for the product in the table, or you can type in questions for sales representative. Sales representative will contact you as soon as possible.

Czech Republic
Hlavní 438, Zborovice, 768 32

Phone: +420 573 369 286

Email: