GSP - High Tech Saws

Slitting saw and knives - production, service


promo video - slitting saws GSP Zborovice

GSP
WORLDWIDE

Slitting saws DIN 1838 B

Slitting saws DIN 1838 B

Slitting saws DIN 1838 B

These buttons will support and recommend our site to other Internet users. Thank you.

Materials: steel, cast, non-ferrous metals
Application: recommended for slotting and cutting materials which make longer chips, suitable for cutting thick-walled profiles (wall over 2 mm)
Machine: metal processing machines

Characteristic:

  • HSS circular slitting saw blades with rought teeth
  • hollow ground with flange, standardly produced without driving pin holes and without groove
  • tooth form B (by request BW)
  • the chip clearance is compared to type A less reduced, which allows to remove chips away from the cutting area efficiently
  • the tolerances and hollow ground according DIN 1840

High quality slitting saw DIN 1838 B, designed especialy for high performance. Slitting saws produced in Europe - Czech Republic.

Product description Slitting saws DIN 1838 B

Circular saw blades for metal DIN 1838 B with rough teeth and teeth form B are recommended especially for cutting-off steels. In comparation with teeth form A they have much bigger chip clearance and they enable bigger cut. In standard modification the saw blades are made with hollow ground and with flange. They can be ordered with teeth form BW (the teeth form B with alternate chamfering).

HSS - circular saw blades for metal DIN 1838 B - rough teeth

D (mm) 20 25 32 40 50 63 80 100 125 160 200 250 315
dH7 (mm) 5 8 8 10 13 16 22 22 22 32 32 32 40
B (mm) number of teeth
0,50 mm         48 64 64 80          
0,60 mm         48 48 64 80 80        
0,80 mm         40 48 64 64 80        
1,00 mm         40 48 48 64 80 80      
1,20 mm         40 40 48 64 80 100
1,60 mm         32 40 48 48 64 80 80 100
2,00 mm         32 40 40 48 64 64 80 100
2,50 mm         32 32 40 48 64 64 80 80 100
3,00 mm         24 32 40 40 48 64 64 80 100
4,00 mm         24 32 32 40 48 48 64 80 80
5,00 mm         24 24 32 40 40 48 64 64 80
6,00 mm         20 24 32 32 40 48 48 64 80

HSS slitting saws coarse with Coarse Pitch as to DIN 1838 Toothform B. Used for medium deep cutting and cut-off operations. Hollow ground on both sides to prevent binding.

D (mm) 2 1/2 3" 3 1/2 4" 4" 4 1/2" 5" 5" 6" 6" 7" 7" 8" 8" 10" 10" 12" 12"
dH7 (mm) 1" 1" 1" 1" 1 1/4" 1" 1" 1" 1 1/4" 1 1/4" 1" 1 1/4" 1" 1 1/4" 1" 1 1/4" 1" 1 1/4"
B (mm) number of teeth
1/6 4 26 30                            
1/3 2 26 30 32 36 38 40 44 44
3/6 4 26 30 32 36 38 40 44
1/1 6 26 30 32 36 36 38 40 40 44 44 48 52 52 62 62
5/6 4 26 30 32 36 36 40 44 48 48 52 52 62
3/3 2 26 30 32 36 38 40 40 44 44 48 48 52 52 62 62
7/6 4 26 30 32 36 44
1/8 26 30 32 36 36 40 40 44 44 48 48 52 52 62 62 70 70
5/3 2   30 32 36 40 44 44 48 52 62
3/1 6 26 30 32 36 40 44 44 48 52 52 62 70
7/3 2   30 32 36 36 40 44 48 52 62
1/4 26 30 32 36 40 44 44 48 52 52 62

Pictures

Order goods Slitting saws DIN 1838 B

Dear customer, you have the opportunity to make a preliminary inquiry to this product. The basket inquiries you can specify your requirements for the product in the table, or you can type in questions for sales representative. Sales representative will contact you as soon as possible.

Czech Republic
Hlavní 438, Zborovice, 768 32

Phone: +420 573 369 286

Email: