Circular saw blades from material HSS/Dmo5 for jewellery production. These saw blades are made with hollow ground with a flange and tooth form A. Tooth pitch is finer than 1 mm, which enables very precise work. Standard modification is without surface coating, but ordering with coating is possible.
Circular saw blades for jewellery |
||||||||||||||||
|
Diameter
(mm) |
Central hole
(mm) |
Flange
(mm) |
Thickness/ Teeth Nr., Tooth form BW | |||||||||||||
| 0,15 | 0,2 | 0,25 | 0,3 | 0,35 | 0,4 | 0,45 | 0,5 | 0,6 | 0,7 | 0,8 | 0,9 | 1,0 | ||||
| 40 | 8 | 10 | 18 | 140 | 140 | 140 | 140 | 140 | 140 | 140 | 140 | 140 | 140 | 140 | 140 | 140 |
| 50 | 8 | 10 | 25 | 180 | 180 | 180 | 180 | 180 | 180 | 180 | 180 | 180 | 180 | 180 | 180 | |
| 63 | 8 | 10 | 32 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | |
Dear customer, you have the opportunity to make a preliminary request for this product. In the inquiry basket you can specify your product requirements according to the table, or you can enter any questions for the sales representative. The sales representative will contact you as soon as possible.
