Materials:
steel, cast, non-ferrous metals
Application:
recommended for deep slotting and cutting materials which make longer chips, suitable for cutting thick-walled profiles (wall over 2,5 mm)
Machine:
metal processing machines
Characteristic:
High quality slitting saw ČSN 222913 half-rought teeth, designed especialy for high performance. Slitting saws produced in Europe - Czech Republic.
The saw blades CSN with half-rough teeth and teeth form A. The cutting edge is very sharp. The chip clearance isn´t reduced as much as in the case of fine teeth. They can be ordered with teeth form AW (the teeth form A with alternate chamfering).
HSS - circular saw blades for metal CSN 222913 - half-rough teeth |
|||||||||||||||
| D (mm) | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | 125 | 160 | 200 | 225 | 250 | 275 | 315 |
| dH7 (mm) | 5 | 8 | 8 | 10 | 13 | 16 | 22 | 22 | 22/27 | 32 | 32 | 32 | 32 | 32 | 32/40 |
| B (mm) | number of teeth | ||||||||||||||
| 0,50 mm | 48 | 64 | |||||||||||||
| 0,60 mm | 48 | 64 | 64 | 80 | |||||||||||
| 0,80 mm | 40 | 48 | 64 | 64 | 80 | ||||||||||
| 1,00 mm | 40 | 40 | 52 | 64 | 80 | ||||||||||
| 1,20 mm | 32 | 40 | 50 | 64 | 64 | 80 | |||||||||
| 1,60 mm | 32 | 40 | 50 | 50 | 64 | 80 | 80 | 80 | |||||||
| 2,00 mm | 32 | 32 | 40 | 50 | 64 | 64 | 80 | 80 | 100 | ||||||
| 2,50 mm | 32 | 32 | 40 | 50 | 50 | 64 | 64 | 80 | 80 | 80 | |||||
| 3,00 mm | 24 | 32 | 40 | 40 | 50 | 64 | 64 | 64 | 80 | 80 | |||||
| 3,50 mm | 24 | 32 | 40 | 40 | 50 | 64 | 64 | 64 | 80 | 80 | |||||
| 4,00 mm | 24 | 26 | 32 | 40 | 50 | 50 | 50 | 64 | 80 | 80 | |||||
| 4,50 mm | 24 | 26 | 32 | 40 | 50 | 50 | 50 | 64 | 84 | 80 | |||||
| 5,00 mm | 24 | 26 | 32 | 40 | 40 | 50 | 50 | 64 | 64 | 64 | |||||
| 5,50 mm | 24 | 26 | 32 | 40 | 40 | 50 | 50 | 64 | 64 | 64 | |||||
| 6,00 mm | 20 | 26 | 32 | 32 | 40 | 50 | 50 | 50 | 50 | 64 | |||||
HSS slitting saws coarse with Coarse Pitch as to DIN 1838 Toothform B. Used for medium deep cutting and cut-off operations. Hollow ground on both sides to prevent binding. |
||||||||||||||||||
| D (mm) | 2 1/2 | 3" | 3 1/2 | 4" | 4" | 4 1/2" | 5" | 5" | 6" | 6" | 7" | 7" | 8" | 8" | 10" | 10" | 12" | 12" |
| dH7 (mm) | 1" | 1" | 1" | 1" | 1 1/4" | 1" | 1" | 1" | 1 1/4" | 1 1/4" | 1" | 1 1/4" | 1" | 1 1/4" | 1" | 1 1/4" | 1" | 1 1/4" |
| B (mm) | number of teeth | |||||||||||||||||
| 1/6 4 | 26 | 30 | ||||||||||||||||
| 1/3 2 | 26 | 30 | 32 | 36 | 38 | 40 | 44 | 44 | ||||||||||
| 3/6 4 | 26 | 30 | 32 | 36 | 38 | 40 | 44 | |||||||||||
| 1/1 6 | 26 | 30 | 32 | 36 | 36 | 38 | 40 | 40 | 44 | 44 | 48 | 52 | 52 | 62 | 62 | |||
| 5/6 4 | 26 | 30 | 32 | 36 | 36 | 40 | 44 | 48 | 48 | 52 | 52 | 62 | ||||||
| 3/3 2 | 26 | 30 | 32 | 36 | 38 | 40 | 40 | 44 | 44 | 48 | 48 | 52 | 52 | 62 | 62 | |||
| 7/6 4 | 26 | 30 | 32 | 36 | 44 | |||||||||||||
| 1/8 | 26 | 30 | 32 | 36 | 36 | 40 | 40 | 44 | 44 | 48 | 48 | 52 | 52 | 62 | 62 | 70 | 70 | |
| 5/3 2 | 30 | 32 | 36 | 40 | 44 | 44 | 48 | 52 | 62 | |||||||||
| 3/1 6 | 26 | 30 | 32 | 36 | 40 | 44 | 44 | 48 | 52 | 52 | 62 | 70 | ||||||
| 7/3 2 | 30 | 32 | 36 | 36 | 40 | 44 | 48 | 52 | 62 | |||||||||
| 1/4 | 26 | 30 | 32 | 36 | 40 | 44 | 44 | 48 | 52 | 52 | 62 | |||||||
Dear customer, you have the opportunity to make a preliminary request for this product. In the inquiry basket you can specify your product requirements according to the table, or you can enter any questions for the sales representative. The sales representative will contact you as soon as possible.
